GCW ZERO的一些基本操作

GCW ZERO的设计决定了很多操作只能通过组合键实现,甚至音量调节也必须这样处理,所以很有必要把操作方式了解一下。基本来说这些组合键都是以将滑动开关上移同时,按相应按键实现不同功能。注意不要仅仅将开关推上去太长时间,会直接关机的。

Action Description
When device is powered off Note that in this mode you can release Power right after pressing it.
Power Boot (turn on) the device. This is the desired way to turn on your GCW Zero.
hold X Button + Power Boot with the backup kernel (if present)
hold Y Button + Power Boot with the backup rootfs (if present)
hold X Button and Y Button + Power Boot with the backup kernel and backup rootfs (if present)
hold A Button + Power Show logs while booting.
hold Select Button + Power Boot into the USB Boot mode. This mode is meant for raw access into device’s memory for flashing purposes. Do not confuse this with firmware upgrade process, described in Firmware Upgradechapter.

To leave USB Boot mode, press the RESET Reset Button button.

When device is powered on Note that in this mode Power must be raised first, and that if you raise it for 3 seconds before pressing another button, the device will be powered off.
Power (hold 3 seconds) or Poweroff.png “Poweroff” menu option Power off (clean shutdown)
Power + Select Button + Select Button or Reboot.png “Reboot” menu option Restart (clean reboot)
Power + Dpad Up or Alsamixer.png “Sound Mixer” menu option Raise audio volume by 1 step (out of 32) (hold to raise by multiple steps)
Power + Dpad Down or Alsamixer.png “Sound Mixer” menu option Lower audio volume by 1 step (out of 32) (hold to lower by multiple steps)
Power + Dpad Right Raise brightness by 1 step (out of 27) (hold to raise by multiple steps)
Power + Dpad Left Lower brightness by 1 step (out of 27) (hold to lower by multiple steps)
Power + A Button Available since 2014-08-20 firmware
Toggle the hardware video scaler between “Fullscreen” and “Keep aspect ratio” modes (supported software only).
Power + B Button Toggle mouse input mode. In this mode Directional Pad acts as a mouse device, while A Button and B Button act as Left and Right mouse clicks. Used by certain software titles.
Power + Y Button Create a screenshot in (FTP) home/screenshots
Power + Select Button Terminate (SIGHUP) the foreground application, losing unsaved data
Hold Lock the buttons (sends KEY_PAUSE action). NOTE: Works only in selected programs. Other programs might utilize this feature for other purposes, or ignore it whatsoever.




感谢对 win2next.com 胜利无限的喜爱,努力推广 少儿足球 校园足球足球技术教学,精选和收集优质足球教学视频足球教学资料信息,希望将win2next建设成国内最好的足球教学网站。

原创文章,转载请注明: 转载自胜利无限 – 助力 足球教学 少儿足球

本文链接地址: http://www.win2next.com/idea/3046